Tuesday 23 October 2012

123 Construction Industry Workers killed on the Job between 2008 - 2011

As an industry we MUST ensure we push SAFETY as a #1 priority
 
 
The stats are in people and our industry falls behind every other sector in the country in safety. Read on -

Construction


The Construction industry employed 1.02 million people in 2010–11, representing 9% of the Australian workforce. Within this industry, 73% of workers were classed as employees and were covered by workers’ compensation. Employers in this industry paid 2.3% of payroll in 2010–11 to cover their employees for workers’ compensation. 

Fatalities


Over the three years from 2008–09 to 2010–11,
123 Construction workers died from work-related injuries. This number of deaths equates to 4.26 fatalities per 100 000 workers which is nearly twice the national fatalities rate of 2.23.

Falls from height accounted for 25% of fatalities (31 deaths) with ladders involved in 11 deaths, buildings in 7 and scaffolding in 7.

Hit by falling objects accounted for 15% of fatalities with a range of building materials and equipment involved. Vehicle incident also accounted for 15% of fatalities with cars involved in 11 of the 18 deaths.

Electrocutions resulted in 17 deaths (14% of fatalities) and Being hit by moving objects accounted for 12 deaths (10%), 8 of which involved a truck.

Serious Claims


The preliminary data for 2010–11 show 13 640 claims for serious injury or illness. Over the three years from 2008–09 to 2010–11 the Construction industry accounted for 11% of all serious workers’ compensation claims. On average there were 39 claims each day from employees who required one or more weeks off work because of work-related injury or disease.

Figure 1 shows that the incidence rate of serious claims in this industry has fallen 36% from 31.0 claims per 1000 employees in 2000–01 to 19.9 in 2009–10. However, this rate remains much higher than the rate for all industries of 13.0 and was the fourth highest of all industries in 2009–10.

Over the past three years Body stressing accounted for 34% of claims with many of these claims due to muscular stress while handling a range of materials and equipment. Falls, trips and slips of a person accounted for 26% of claims and there were similar numbers for Falls from height as Falls on same level. Being hit by moving objects accounted for 16% of claims. Many of these claims involved being hit by falling materials or equipment.

Over the period 2006–07 to 2009–10 all jurisdictions except the Australian Capital Territory recorded decreases in incidence rates. The largest decrease was recorded by South Australia (27%) closely followed by Tasmania (26%) and Western Australia (24%). The Australian Capital Territory recorded a 14% increase.

The preliminary data for 2010–11 show that incidence rates across Australia ranged from 12.6 claims per 1000 employees in the Northern Territory to 25.2 in Tasmania.

Over the period 2006–07 to 2009–10 South Australia recorded the largest decrease in incidence rates (39%) followed by the Northern Territory (29%). The Australian Capital Territory recorded the largest increase (17%).

The preliminary data for 2010–11 show that the Australian Capital Territory recorded the highest incidence rate of 9.5 claims per 1000 employees while the Northern Territory recorded the lowest at 2.5.

Claims data were extracted from the National Data Set (NDS) for compensation statistics. The data presented here are restricted to accepted claims for serious injury and disease. Serious claims include fatalities, claims for permanent disability and claims for conditions that involve one or more weeks of time lost from work. Serious claims do not include those involving journeys to and from work. The 2010–11 data are preliminary and expected to rise. More information on this industry can be found at safeworkaustralia.gov.au

Information on fatalities is extracted from the Traumatic Injury Fatalities database. Annual fatalities reports can be found at http://www.safeworkaustralia.gov.au/ov.au

This message proudly brought to you by - www.keyshr.com.au/OnlineWhite-Cards.aspx



Monday 1 October 2012


Construction white cards now available online
In order to work in the construction industry in Australia, it is essential to be the holder of a valid safety induction card. To obtain a construction white card, a worker needs to successfully complete a short accredited course in Occupational Health and Safety (OHS) in the construction industry. The course can now be done online, and the card sent out the next day.
While it is possible to undergo the training and assessment for a white card by traditional methods, it may be easier for many people to obtain their white cards online. For instance, people who live and work in remote areas can get a white card quickly online, without having to travel to a major town or city for training.
The Queensland white card is now available online, and in some good news for construction workers, it is now recognised by all states and territories in Australia.


Why is a white card required?
Working in the construction industry can involve a lot of risky work. It’s important for construction workers to understand OHS legislation and risk management, to know how to follow safety procedures, and to practice fire safety and personal protection. A white card indicates that holders have studied these elements of workplace safety.

 Risks in the construction industry
Risk management is important in every workplace, and particularly so in the construction industry. Depending on the particular site, workers in construction may be at risk of the following:

·         Falling from heights.

·         Being struck by falling objects or moving equipment.

·         Suffering from burns, electric shocks, or inhalation of fumes from welding or arcs.

·         Exposure to noise, extreme temperatures, vibration, or asbestos.

·         Slip, trip and fall accidents.

·         Suffering injuries from hazardous chemicals, unstable structures, shafts and lift wells, collapsed trenches, and unguarded holes.

According to Safe Work Australia, all workers have a responsibility to take reasonable care for their own health and safety and to not endanger others.

Risk management involves identifying hazards in the workplace, assessing risk and taking steps to eliminate or minimise possible harm.

Obtaining a white card online

Undertaking the OHS course online is very convenient and quick, taking less than a day. The white card can be sent out the next day in some cases, which is good news for workers who need a card to start work.

Having access to the accredited course online means being able to do the course when it suits, and not having to miss out on jobs because you can’t get a card fast enough.

The course involves reading OHS legislative material and risk management material, and answering a series of multiple-choice questions. Assistance is available throughout the training, which can be done anytime and anywhere there’s access to the internet.